BENETEAU FIRST 21.7 Owner's Manual

10, BENETEAU FIRST 21.7 FIRST 21.7 ANG 24/06/04 10 / 30 DECK FITTING LAY OUT REF STANDARD MAST 1 Genoa Furling Line 2 Mainsail Halyard 3 Reef n° 1 4 Spinnaker Boom Toppping Lift 5 Reef n° 2 6 Spinnaker Halyard 7 Spinnaker Boom Downhaul …

14, FIRST 21.7 ANG 24/06/04 14 / 30 VII) BILGE PUMP SYSTEM REF DESCRIPTION 1 Inside Manual Bilge Pump 0.75 l/mn 2 Outside Manual Bilge Pump 1.9 l/each time 3 Inside Bilge Pump Intake 4 Outside Bilge Pump Intake 5 Inside Bilge Pump Delivery 6 Outside Bilge Pump Delivery …

30, FIRST 21.7 ANG 24/06/04 30 / 30 XVI) CENTREBOARD SYSTEM Operation: To raise the centreboard, activate the mechanism clockwise. To lower the centreboard, activate the mechanism anticlockwise. About 57 rotations are necessary to go…

27, FIRST 21.7 ANG 24/06/04 27 / 30 The Outside Teak Woodworks : Scrub the woodworks using water. The teak woodworks do not need any particular protection. If you just rub them down with fine sandpaper, it will renovate the look of the teak. Plexiglass : Rinse with …

9, FIRST 21.7 ANG 24/06/04 9 / 30 V) SAILS AND RIGGING Specifications of the Sails : SAIL AREA m² I 8.59 m Total 25.20 m² J 2.40 m Main Sail 13.80 m² P 8.24 m Genoa (maxi) 11.40 m² E 2.85 m Spinnaker 34.70 m² LP 2.67 m Specifications of the Standing R…