Blizzard Lighting ToughPAR Satellight Operation & User’s Manual

3, Blizzard Lighting ToughPAR Satellight Page 3 ToughPar Satellight Manual Rev. A © 2014 Blizzard Lighting, LLC 1. GETTING STARTED What’s In The Box? • 1 x ToughPar™ Satellight Professional LED PAR Fixture • 1 x IP Rated AC power cord with cable cap • 1 x Set of IP Rated DMX in/out cables • This Lovely User Manual Optio…

8, Page 8 ToughPar Satellight Manual Rev. A © 2014 Blizzard Lighting, LLC Cable Connectors Cables must have a male XLR connector on one end and a female XLR connector on the other end. (Duh!) CAUTION: Do not allow contact between the common and the x- ture’s chassis ground. Grounding th…

6, Page 6 ToughPar Satellight Manual Rev. A © 2014 Blizzard Lighting, LLC Figure 1: The ToughPar™ Satellight Pin-Up Picture AC Power In DMX Out DMX In Menu Buttons A/B LED Display AC Power Out 10-watt RGBW 4-in-1 LEDs IP65-Rated Cast Aluminum Enclosure Secure Grip Locking Knobs Tempere…

19, Page 19 ToughPar Satellight Manual Rev. A © 2014 Blizzard Lighting, LLC Tech Specs! Weight & Dimensions Length 9.06 inches (230mm) Width 9.06 inches (230 mm) Height 8.46 inches (214.88 mm) Weight 7.8 lbs (3.5kg) Power Operating Voltage 100-240VAC, 50/60 Hertz Fuse 250V, 3A …

13, Page 13 ToughPar Satellight Manual Rev. A © 2014 Blizzard Lighting, LLC Red Intensity 1.) Push the “A” button until the LED display reads “P0-”. 2.) The right digit will be ashing. Use the “B” button to choose the intensity level from 0-9 (0% <--> 100%). Gree…

14, Page 14 ToughPar Satellight Manual Rev. A © 2014 Blizzard Lighting, LLC DMX Values In-Depth (5-Channel Mode) Channel Value What It Does 1 000 <--> 255 Red Intensity (0% <--> 100%) 2 000 <--> 255 Green Intensity (0% <--> 100%) 3 000 <--> 255 Blue Intens…