Kawai Professional Stage Piano MP8II Owner's Manual

49, 49 8.2.11 Receive Channel This parameter determines whether or not a particular MIDI channel will receive incoming MIDI data from an external source. This parameter can be used to filter out data on specific MIDI channels that are not intended for the MP8II. On: The MP8II responds to MID…

13, 13 6. USB JACK This jack is used to connect the MP8II with a personal computer. See page60 for details. 7. POWER SWITCH Turns the MP8II ON or OFF. 8. POWER RECEPTACLE Connect the power cable, which is included in the MP8II package, to this receptacle. Ofrecido por www.electromanuales.co…

65, Kawai Professional Stage Piano MP8II 65 01H 64H mmH Decay time mm:00H - 7FH(-64 ~ 0 ~ +63) Default = 40H 01H 66H mmH Release time mm:00H - 7FH(-64 ~ 0 ~ +63) Default = 40H * Ignoring the LSB of data Entry * It is not affected in case of modifying cutoff if tone does not use the DCF. RPN MSB/LSB Status 2nd Byte 3rd Byte BnH 65H mmH …

14, 14 2. Basic Operations 2.1 Getting Ready Since the MP8II has no built-in speakers, you will need to connect a mixer, keyboard amplifier or headphones in order to listen. Turn the MP8II on, using the POWER SWITCH on the rear panel. It is recommended to turn the MP8II on before turning on any amplifi…

36, 36 6.2.14 Velocity Switch Velocity switching is an extremely useful and creative tool for customizing a performance. Using Velocity Switching, it is possible to have either one sound switch to another sound at a set velocity, or even for a second sound to be added in once a certa…

24, 24 3.8 External Sequencer Start/Stop You can start and stop the external sequencer connected to the MP8II with SW button. First, connect an external sequencer to the MIDI OUT jack on the rear panel of the MP8II. Make sure that the sequencer is capable to receiving external MIDI clock and commands…