COP-USA ALC-DVR Operation & User’s Manual

7, 12 6.2 Date/ Time 6.3 Motion Detection 1. Window Setup: Detection Block: Formed by two or more cells. Cursor: Press / // /II button to switch to Select/ Edit mode. Detection Cell: The whole screen is divided into 16x12 cells. Detection Block. 2. Cursor Movement: Press / // /II…

6, 10 Manual Motion Detection Continuous Alarm ( NOTE 1 & NOTE 2 ). Each color distinguishing different recording events, the user may press or button to move the cursor left or right and immediately shows the first image of the highlighted event on the screen display background. Displa…

5, 8 3. Record Display: Record Status: : Indicates recording is in progress. Record Mode: Manual Record Schedule Record Motion Detection Record Alarm Record Record Storage Mode Status: Continuous Record % Remaining Storage Capacity 4 System recording is determined accordin…

10, 18 6.8 Factory Default Press Enter button, returns all settings to the factory default value ( NOTE 1 ). Press /? ?? ? button, exit this screen display and returns to the Main Menu. NOTE 1: Returning to factory default will erase all previous selected configuration values . Except for d…

11, COP-USA ALC-DVR 20 9. SPECIFICATIONS STANDARD FUNCTION System NTSC / PAL Video System and Video Loss Auto Detection Codec MPEG4-SP ASF File Format Record Frame Rate 1, 2, … , Maximum fps selectable Maximum: 30 fps@320x240 / 12 fps@640x480 Record Quality Low / Medium / High Recording Date/Time Overla…

4, 6 5. OPERATION 5.1 Power On 1. To power-up, connect to a AC power outlet. NOTE 1: Each time after powering on, the system will auto-detect its peripherals. The REC LED will flash indicating the SD card is proceeding with testing (complete boot time is several seconds) When an image file erro…