Stagg SLI-FLATPAR2 Operation & User’s Manual

8, ! ! IMPORTANT SAFETY INSTRUCTIONS READ AND KEEP THESE INSTRUCTIONS. HEED ALL WARNINGS. • If, after you have followed the instructions outlined above, this device fails to function, please contact your dealer. Under no circumstances should this device be opened. Leave all…

6, ! DMX Channels & Value DMX Channels & Value : 4 Channel Mode Channel Value Function ch1 0--255 red (0%--100%) ch2 0--255 green (0%--100%) ch3 0--255 blue (0%--100%) ch4 0--255 white (0%--100%) DMX Channels & Value : 7 Channel Mode …

4, ! Display Functions Addr - DMX Address Setting via control board 1. Tap the MENU button and UP or DOWN button until “Addr” is displayed, then press ENTER. 2. “Axxx” will now be displayed, “x” represents the displayed address. Press the UP or DOWN buttons to find yo…

2, Stagg SLI-FLATPAR2 ! Unpacking: Thank you for purchasing this product. Every model has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the packaging appears to be damaged, carefu…

5, ! white manually. Select “AtF”, press ENTER; “rxxx” “Gxxx” “bxxx” or “Uxxx” will be displayed. You can then adjust it between 1-255, press ENTER; you can mix other colours by pressing UP or DOWN to adjust it. Chan - This menu will let you select your desired DMX Channel mod…