Smartguard E300CA-1 Operation & User’s Manual

3, Warm Up Standby Mode Installation Insert/remove SD card z Unscrew the cover using provided Allen key (FIG. 1a) z Insert provided 2GB SD card or SD card with memory up to 32GB by your choice into the card slot (FIG. 1b). z Refit the cover, and fasten the screw clockwise…

1, SmartGuard E300CA-1/E150CA-1 User’s Manual Table of Contents: SmartGuard Overview .......................................................... 2 Definition of View Parts......................................................... 3 Installa…

2, SmartGuard Overview Features z Crystal Clear Color Video Camera (640*480) z Motion Activated Security Light z Capture 20sec/1min/5mins video when motion detected z SD card memory slot, 2GB SD card included z 4 Alert Sounds for selection (2 are recordable) z 4 Scenes satisf…

5, To record your own sound/voice: z Select audio warning 3 or 4. z Press Set for 3 seconds, the light flashes once implies the SmartGuard is ready for recording. z Wait for 5 seconds, LCD occurs with REC, the recording starts. z After that, LCD returns back to audio warning …

4, Year z Under standby mode, press Set for 3 seconds. z After displays on LCD, press Up or Down to select correct year. Year range is between 2010 ~ 2099. Date & Time z After year setting, press Set to enter month & date. z displays on LCD, press Up or D…

8, Smartguard E300CA-1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferenc…