iSP Technologies Decimator Prorack Owner's Manual

5, OPERATION When properly used, the Decimator ProRack should be completely transparent, it should have no effect on the audio signal other than to remove the background noise. To maximize the performance of the Decimator, it is necessary to understand both the operation of the control…

7, SETTING THE FILTER TRACKING CONTROL The FILTER TRACKING control adjusts the relationship between the sensitivity of the Dynamic Filter and the Expander. Once the THRESHOLD control is set for proper operation of the downward expander increase the FILTER TRACKING control until the desired …

6, Low Level Downward Expansion is performed by use of a high quality voltage controlled amplifier controlled by an RMS based audio level detection circuit. A second Time Vector Processing circuit that varies the release response over a 1000 to 1 ratio controls the release r…

3, FRONT PANEL 1. POWER SWITCH Switches the unit on and off. 2. POWER LED Indicates when the power is on. 3. FILTER TRACKING CONTROL This control adjusts the sensitivity of the filter threshold in relation to the downward expander threshold. Turning this control clock…

2, iSP Technologies Decimator Prorack INTRODUCTION The Decimator ProRack noise reduction system defines a new standard for excellence in real time noise reduction performance. The Decimator ProRack was designed to provide the maximum possible performance in a rack mount dual channel noise…