Escea IB1100 Installation Manual

44, 630184_1 IB Service Manual NZ 5 Cleaning the Log Set and Glass: NEVER RUB THE FASCIA. The outside of the fascias must only be cleaned with a clean damp cloth, dry off after cleaning. The high temp silver powder coating that is used on Escea fascia parts contains certain amounts of alumini…

1, Escea IB1100 630184_4 IB Installation Manual NZ IB1100, IB850, IB600 (Log Fire / Coal Fire) Installation Manual NEW ZEALAND EDITION Important: The appliance shall be installed in accordance with; This installation instruction booklet Local ga…

22, 630184_4 IB Installation Manual NZ 22 18.0 Attaching the Flue to the Fireplace: Once the gas fireplace has been inserted into the ZCK and the firebox removed, the flue can be attached. To do this line up the 100mm flue with the flue outlet …

19, 630184_4 IB Installation Manual NZ 19 14.3 It is recommended that a gas isolating valve be installed as close to the regulator on the gas inlet side as possible. This will allow for easier servicing in the future. 14.4 If the room has not been complet…

31, 630184_4 IB Installation Manual NZ 31 24.5 Step 5: If changing from LPG to NG, slide the supplied burner collar onto the burner tubes of both burners as shown to the right and secure in place using the supplied screw as shown If changing from NG to …

32, 630184_4 IB Installation Manual NZ 32 25.0 Checking Operating Pressure: WARNING: The regulator that is supplied with the fire MUST NOT BE REMOVED. Removal of the regulator, or replacing it with one not intended for use with an Escea fire, will void the limited appliance warranty. This …