ClearView 834IP71 Quick Start Manual

97, 30 Parameter Function Trap port The destination port of the Trap information from the proxy program of the device. It is for the gateway device and the client-end PC in the LAN to exchange the information. It is a non-protocol connection port. It has no effect on the network applications. It i…

30, ClearView 834IP71 4 Figure 2-2 Note This series product supports two cable exits. One is from the bottom and the other is from the side. Please refer to the following figure for cable exit from the side information. Figure 2-3 Please earth the GND port of the device to enhance the device relia…

13, Mini IP Dome Camera 3.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 3.2 Operation Double click …

56, 12 Figure 3-4  5HVWRUH )DFWRU\ 'HIDXOW 6HWXS ,QWURGXFWLRQ Important Please use RESET button when device is running. Step1 Please refer to step1 and step2 in chapter 3.1to loose the dome body. Push a little bit; you can take the dome body from the gland cover. Step2 Tak…

8, Quick Start Guide -- -- -- --- - -- ·- Please refer to the following sheet for detailed information. SN Name ,, 1 X- Y -Z rotation module 2 Device lens 3 Dome camera enclosure SN Name Function 4 Power input port Connect to the DC + 12 power to input the powe…