MICRO-EPSILON LS Instruction Manual

15, Page 15 Operation thermoMETER LS 4.2 Control and Display Elements Fig. 3 Control and display elements 1 Precision glass optics 2 Optics toggle switch SF/ CF 3 Tripod mount 4 Trigger 5 Display 6 Up and Down buttons 7 Mode (I and II) buttons 8 Handle and battery compartment 9 USB inte…

38, Page 38 Data Logger thermoMETER LS 8.2 Material and Position Names You can assign a 4-digit alpha numeric description to any data logger position. This description will be shown in the bottom display and has the following presetting: P000 (for position 1) – P099 (for position 100) Fig. 4…

66, MICRO-EPSILON LS Page 66 Anhang | Emissivity Table Metals thermoMETER LS A 2 Emissivity Table Metals i Please note that these are only approximate values, which were taken from various sources. Material Typical Emissivity Aluminum Non oxidized 0.02 - 0.1 Polished 0.02 - 0.1 Roughened 0.1 - 0.3 Oxidized 0.2 - 0…

17, Page 17 Measurement thermoMETER LS 5. Measurement 5.1 Handling Please hold the device as shown, see Fig. 6, and aim at the target. Pull the trigger (1) and keep it pressed, see Fig. 6. Fig. 6 View normal use Fig. 7 View vertical use If the laser is activated the true size and location of t…

40, Page 40 Data Logger thermoMETER LS 1 2 3 4 To leave the data logger mode please press again the Trigger and V simultaneously. If no button is pressed, the unit switches off after approx. 30 s. …

46, Page 46 Software IR Connect thermoMETER LS The individual columns are described in the following table: Columns in the logger table Index Serial number Date Date of measurement Time Time of measurement TObj Object temperature TObj Min Min. object temperature TObj Max Max. object temper…