Microh ARENA ultra spot Operation & User’s Manual

5, 24 The ignition of the lamp is seven times unsuccessful (the HEAt message appeared six times before), and the display shows "LAEr", meaning that the lamp could be damaged or even missed, the fixture is overheating (this can occur if the ambient temperature is 40° C or more) or ther…

6, 6 1.3 Photometrics 23 ENGLISH - Adjusting the default positions of colour, gobo and effect wheels By this function you can calibrate and adjust the colour, gobo and effect wheels to their standard/right positions. Use the [Up] and [Down] keys to browse through the adjus…

4, Microh ARENA ultra spot 4 CAUTION! Keep this device away from rain and moisture! Unplug power supply before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START - UP! 1. INTRODUCTION Unpack your MICROH ARENA ULTRA SPOT and …

12, 12 The ARENA ULTRA SPOT can be placed di- rectly on the stage floor or rigged in any orien- tation on a truss without altering its operation characteristics (see the drawing). The fixture’s base enables to be mounted in two ways. Use the clamps with screws M10 or M8 - check th…

10, 10 If the light is brighter around the edge than it is in the center, or if light output is low, the lamp is too far back in the reflector. "Push” the lamp out by turning the screws "A, B, C” counterclock- wise ¼-turn at a time the light is bright and evenly distri…

8, 8 2.2 Operating determinations This device is a moving-head spot for creating decorative effects. This product is only allowed to be operated with an alternating current of 230 V, 50 Hz and was designed for indoor use only. This device is designed for professional use, e.g. on stages, in dis…