Micron Electronics TransPort NX Operation & User’s Manual

143, Basic AT Commands Appendix D - Fax/Modem Information 143 Appendix D - Fax/ Modem Information Basic AT Commands Prefix Suffix Function A Manually answer incoming call. A/ Repeat last command executed. Do not precede A/ with AT or follow with ENTER. B_ B0 CCITT mode (V.22) B1 Bell mode (Bell …

41, Operating System Chapter Two - System Features 41 other than the system board (such as the display, keyboard, or an adapter card) an error message is displayed on the screen and testing is stopped. The POST does not test all areas of the computer, but only those that allow it to be operational …

148, Micron Electronics TransPort NX Section 8 - Result Codes Appendix D - Fax/Modem Information 148 Section 8 - Result Codes Result Code Numeric Result Code Numeric OK 0 Connect 1 RING 2 NO CARRIER 3 ERROR 4 CONNECT 1200 EC* 5 NO DIALTONE 6 BUSY 7 NO ANSWER 8 TABLE 15. Section 8 - Result Codes …

6, Table of Contents 6 Removable CD-ROM ................................................... 29 Audio System............................................................... 29 Audio Ports .................................................................. 29 Battery and AC Power System ............…

58, Data Storage and Retrieval Chapter Four - Data Storage 58 Installing the CD-ROM Drive To insert the CD-ROM module, slide the module into the drive bay so that it mates with its connector. You will hear the release latch click shut. Loading a Disc To play a CD disc, follow the instru…

30, System Features Chapter Two - System Features 30 Input/Output Devices Most of the TransPort NX’s hardware features can be described as input and output devices. An input device is a hardware device used to enter information to be processed by the computer. Examples of input device…