Bradford Vehicle Video Monitoring System Manual 

4, -3- C01 Adjustable Camera 1. Use appropriate hardware (not included) to affix the base camera to your mounting surface. 2. Route your cable as desired and connect it to your monitor. If you are running the cable through a hole, use the rubber grommet to prevent wire damage. 3…

7, Bradford Vehicle Video Monitoring System -6- Operation DIM This is a photocell that is used to sense the ambient light and auto dim the screen in low light conditions. CAM Switches which camera/input is shown on the monitor. M/N Mirrors (flips) the image D/N When the DIMMER is set for Manual mode (see below) this…

8, -7- ONE YEAR LIMITED WARRANTY The manufacturer warrants each new product against factory defects in material and workmanship for one year after the date of purchase. The owner will be responsible for returning to the Service Center any defective item(s) with the trans…

3, -2- Recommended method !! Monitor Installation • The monitor is designed for interior use only and must be mounted in a dry location. • Install the monitor on a surface that will support a minimum of 9lbs. • Choose a location a minimum of 16” from any speakers to redu…

5, -4- C8R and C8L Side Mount Cameras 1. Remove the three screws securing the cover to the camera. 2. Use appropriate hardware (not included) to affix the base camera to your mounting surface. 3. Route your cable as desired and connect it to the monitor. If you are runni…