EVOC EC7-1813CLD2NA SERIES Operation & User’s Manual

48, Chapter 3 BIOS Setup EC71813CLD2NA SERIES  43  System Resource Managed by BIOS under X86 Platform We define three kinds of system resources here: I/O port address, IRQ interrupt number and DMA number. u DMA Level Function DMA0 DRAM Refresh DMA1 Unassig…

35, Chapter 3 BIOS Setup  30  EC71813CLD2NA SERIES l Hyper Threading Technology Control switch for the Intel Hyper Threading Technology function. l Intel(R) SpeedStep(tm) tech Control switch for the Intel(R) SpeedStep(tm) tech function. Ø IDE Configuration BIOS SET…

3, EVOC EC7-1813CLD2NA SERIES Safety Instr uctions 1. Please read this manual carefully before using the product; 2. Leave the board or card in the antistatic bag until you are ready to use it; 3. Touch a grounded metal object (e.g. for 10 seconds) before removing the board or card from the antista…

13, Chapter 2 Installation  8  EC71813CLD2NA SERIES Jumper Setting 1. JCC1: Clear/Keep CMOS Setting (Pitch: 2.0mm) CMOS is powered by the button battery on board. Clearing CMOS will restore original settings (factory default). The steps are listed as f…

32, Chapter 3 BIOS Setup EC71813CLD2NA SERIES  27  Chapter 3 BIOS Setup BIOS Overview BIOS (Basic Input and Output System) is solidified in the flash memory on the CPU board. Its main functions include: initialize system hardware, set the operating status of the system …

2, Copyright Notice Information offered in this manual is believed to be correct at the time of printing, and is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no …