Code Alarm CA 610 Owner's Manual

10, 128-6530 10 of 10 NOTE: The engine will stop running before the expiration of the pre- programmed run timer if you complete any of the following: 1. Press and release trunk/key button of your keychain transmitter two times within 2 seconds. 2. Depress the brake pedal. 3. Open the hood. 4. Move the…

13, 128-6530 13 of 10 Code Systems, Inc. Limited Lifetime WarrantyCode Systems, Inc. Limited Lifetime Warranty A Code Systems Inc. (“CODE”) vehicle comfort, convenience and security system sold to a retail consumer purchaser by an authorized dealer of CODE and installed by an authorized dealer o…

15, 128-6530 15 of 10 How to file a request for payment: If the above conditions are met, make your request for payment by submitting the following to CODE. The request for payment must be received by CODE no later than sixty (60) days after the vehicle is reported stolen. 1. Copy of the r…

8, 128-6530 8 of 10 2. Within 5 seconds, press and release the pushbutton switch 1 time. 3. Within 5 seconds, turn the ignition switch OFF then ON. 4. Within 5 seconds, press and release the pushbutton switch 1 time. 5. Turn the ignition switch OFF then ON and start the vehicle. NOTE:If you have chang…

6, Code Alarm CA 610 128-6530 6 of 10 Page 6 VALET SWITCH: The valet switch allows you to temporarily bypass all alarm functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature…