EVS XHub3 Technical Reference Manual

18, 7. Click Install. A DOS window opens for update. The Branch Status LED on the XHub3 front panel shows the software version already installed on the XHub3 device. 8. Press the U key to upgrade the software version (or press the Q key to quit without installing). Once the upgrade is do…

16, 3.2. Upgrading the XHub Software The upgrade of the XHub3 software is performed via USB cable. The USB driver and the software upgrade can be done at the same time. 1. Connect ... ◦ the USB cable between the XHub3 (Standard-B type connector) ◦ to the computer (Standard-A type connector).…

7, EVS XHub3 1. Introduction XHub3 is an 8-port SDTI hub for the XNet. It provides information about general network status and status of individual branches of the network, automatically isolating faulty branches in case of unexpected problems, and protects the other sections of the network to guarant…

22, To learn more about EVS go to www.evs.com Corporate +32 4 361 7000 North & Latin America +1 973 575 7811 Asia & Pacifi c +852 2914 2501 Other regional offi ces www.evs.com/contact EVS Broadcast Equipment is continuously adapting and improving its products in accordance with the ever c…

12, 2.3. Rear Panel Overview # Element 1. Power supply 2 (IEC connector) 2. Power supply 1 (IEC connector) 3. Configuration DIP switch matrix 4. Status LED 5. Speed LED 6. Link connector 7. Branch status LEDs 8. Input connectors 9. Output connectors Configuration DIP Switch Matrix All 8 switches mus…

6, What's New? In the XHub3 Technical Reference manual, the icon has been added on the left margin to highlight information on new and updated features. The changes linked to new features in version 4.00 are listed below. Changed behavior for Speed LED • See section "Front Panel"…