HY Technologies 323-04 Operation & User’s Manual

5, - 4 - e) If necessary, smooth the sharp edge of the holes with a polishing head or small round file. f) If you have a non-vertical bumper, you may need to use the wedge-shaped plastic sensor spacers provided. Carefully push each sensor into its sensor spacer. g) Run the sensor …

2, - 1 - Backup Parking Sensor System 4 Rear In-Bumper Type Sensors Wireless Digital Display with Built-in Audible Alert For Cars, VANs, SUVs, and Trucks MODEL 323-04 Included in the Box ¾ 4x Sensors with attached cable and 2-pin mini plug. Cable Length: 2.5m…

7, - 6 - IMPORTANT The Parking Sensor Systems sold and distributed by HY Technologies are only a device used to assist a driver while parking. They should not be considered as a substitute for driver responsibility when operating a vehicle. No warranty as to operational eff…

3, - 2 - How the System Works The Backup Parking Sensor System determines obstacle distance by measuring the time needed for the ultrasonic wave emitted by a sensor to reach an obstacle and for the sensor to receive the ultrasonic wave reflected from the obstacle. Given the speed of the ult…

4, HY Technologies 323-04 - 3 - Installation and Wiring IMPORTANT: (a) Read this manual thoroughly before proceeding to installation. You can also have the system installed by a professional installer such as your local auto mechanic/auto electrician/car stereo store. (b) Turn off the engine and …

6, - 5 - Warning z To avoid collision with obstacle because of the inertia of vehicle while backing up/parking, keep your vehicle speed at about 3 miles per hour and stop the vehicle immediately once you hear the continuous beeping. This is because even if brake is applied, …