Milesight NVR Operation & User’s Manual

50, User Manual www.milesight.com 46 Step3.Drag the mouse to draw certain areas in recording setting zone and then click[Apply] to save the configuration. Step4. Copy the recording settings to other channels. Select [Copy] to copy the same settings to other c…

43, User Manual www.milesight.com 39 Step2: Enable video title and timestamp: [Video Title]: Set the video title for the channel; [Title Position]: Set the position for the video title: Top-Left or Top-Right; [Date Position]: Set the position for the date: Top-Left, Top-Rig…

2, User Manual Installation Notes Please be advised of the following tips before using your NVR:  Keep all liquids away from the NVR.  Place the NVR in a well-ventilated environment.  Ensure NVR is running within the allowed humidity and operating temperature.  It w…

77, User Manual www.milesight.com 73 3.8 System Settings 3.8.1 General Setting Step: Enter general menu by clicking Main MenuSystem SettingsGeneral To setup the general parameters of NVR, including modify the host name, device ID, select resolution, and set s…

9, Milesight NVR User Manual www.milesight.com 5 NO. Item Description 1 POWER Powers NVR on/off. 2 USB Ports USB ports for additional devices such as USB mouse, USB flash drive and USB HDD. 3 IR Receiver Receiver for IR signal. (3) MS-N8000 Series: MS-N8016 …

94, User Manual www.milesight.com 90 F-3.8.22 3.8.7 Save/Load Configuration 3.8.7.1 Backup/Restore Your NVR supports backup and restore configuration. Step1: Enter profile menu by clicking Main MenuSystemSave/Load Configuration→ Backup/Restore F-3.8.…