ATD2 SUB12.D Operation & User’s Manual

28, Page 28 5 TECHNICAL SPECIFICATIONS Model SUB12.D SUB15.D Woofer 12" 15" Characteristics Frequency response (-3dB) 30 Hz – 160Hz 20 Hz - 160Hz Xover Frequency (LR-4) 40 Hz to160 Hz, step 1 Hz 40 Hz to160 Hz, step 1 Hz Phase tuning @ Xover freq…

13, Page 13  Figure 13: Display behavior when the analogue input level exceeds the selected full scale level 3.3.6 Curve selection The Curve selector is the 6 th menu item. The user can select a preset curve which will modify the frequency response of the monitor to emulat…

23, Page 23 LEFT RIGHT AES/EBU (LEFT & RIGHT) Note: It is not useful to have both the XLR cables and the network cable in place between two speakers. The quality of the digital audio link provided by the FAR Link TM network is at least as good as the one…

25, ATD2 SUB12.D Page 25 Note: If a second subwoofer for the LFE channel is required, it can simply be inserted right before or after the first subwoofer. The second subwoofer will copy all the settings of the first subwoofer but the spear ID that shall be “9.SUBWOOFER 2”. If the…

24, Page 24 However, for practical reasons and future system maintenance easiness, we do strongly recommend using the FAR Link TM network, even if no remote control is required. 4.2.3 Multi-channel 5.1 System A 5.1 digital setup does require 3 AES/EBU cables, each of…