AV Stumpfl SC MASTER 6 Operation & User’s Manual

31, Details on how to produce presentation data for CF card can be found from page Fehler! Textmarke nicht definiert. onwards. Refer to the Online Help to find out about the sophis- ticated ways of programming with Wings Platinum. This help is context-sensitive, i.e. by pressing the F1 key…

122, AV Stumpfl SC MASTER 6 aNm.c<x.t# Fades output channel c in SC Net module m to value x at the time specified in t. m = 1 to 125. c = 1 to 512. x = 0 to 255. t = 0 to 999. Time value in steps of 0.1 seconds. 999 corresponds to 99.9 seconds. 114 • 13BTechnical Appendix …

121, aP# PAUSE function. Corresponds to the PAUSE key on the remote control unit aPx# PAUSE show x. Only the specified show is put in Pause Mode. x = show number from 1 to 200. aPEx# PAUSE END Show x Pause Mode is only canceled for the specified show. x = show number fr…

49, The Start Behavior of the addressed show can be defined as follows: N Normal start. A show can only be started if no other show is running. The currently running show is not inter- rupted. I Interrupt Start; every running show is terminated B A running show is started again …

114, Î CF card is formatted to FAT32 or NTFS file system. Solu- tion: Format the CF card to FAT16 file system. In the Win- dows Explorer, right-click the CF card, followed by Format... Select file system FAT and format the CF card. Then copy the presentation data once again onto CF card. …

127, REMOTE connector 1. Start show 2 2. Start show 1 3. + 15 VDC up to + 25 VDC (unstable) output 4. Analog input 1 (max. 0-5VDC) 5. +5V DC regulated output (max. 20 mA) 6. GND internal 7. Toggle input 8. Open-collector output (IR-Out 2, DMX-Out) 9. Analog input 2…