RoyalWay-tech Rlink Quick Start Manual

11, RoyalWay-tech Rlink We have shielded cables custom for common radios in the market: Plug and play cable for Futaba radios with square trainer port: Plug and play cable for Turnigy/Imax/Flysky 9x2, 9XR, frsky Taranis, JR 3801, 9x2 and similar: …

3, Spectations: TX： Size:73*65*15mm Weight:64g Working voltage:7-16v Current:180ma@12v, low power mode 360ma@12v, high power mode RX： Size：45*30*6mm Weight：16g Voltage：4-6v Current：75ma@5v Assembly & Connection： The Rlink can be set up to any radio with trainer port in the market (o…

1, Rlink 16-chan UHF long range radio system Quick Start Guide v1.1.2 Revision history： 2013.12.16 v1.1.0 2014.01.24 v1.1.2 for hardware v1.0/v1.1 and firmware v1.1.2 or above Thank you for purchasing this RoyalWay-tech product. Please conform to the manual strictly to set up the Rlink to your air…

10, Press the button of the RX module, connect the Rx module to computer with the MicroUSB cable, the RX will be identified as a U disk named bootloader, copy the new firmware(.bin) file to this vacant U disk, when done, remove the USB cable and cycle the power of the RX to complete t…

7, your radio) as your mode switch, the original switch on the Rlink Tx module will be invalid in this situation, when it set to be 0, default to be disabled. Channel maximum number：The maximum channel number you want to transmit, range: 2-16 which means 2-16 channels.The more channe…