Kronos Sparta Assembly Instructions Manual

4, Fill the oil well with 8 ml of Kronos oil. Make sure to put oil on the bearing shaft. Do not use any other oil type. Do not overfill. Place the bearing ball on the top of the shaft. Make sure the ball stays in place. Install carefully the lower platter. Make sure the platter …

7, Speed can be selected using the 33/45 toggle switch. The strobe ca be used to adjust the playback speed. To change the speed, the adjustment toggle switch must be depressed toward the + or -. Each click of the toggle will change the speed in small steps. ONCE THE SPEED IS SET: P…

8, Kronos Sparta TECHNICAL SPECIFICATIONS: dimensions: 20 in (W) x 14 in (D) x 11 in (H) 51 cm (W) x 36 cm (D) x 28 cm (H) weight: 70 lbs / 32 kg crate dimensions: 24 in (W) x 32 in (D) x 16 in (H) 61 cm (W) x 81 cm (D) x 41 cm (H) shipping weight: 95 lbs / 43 kg rotational speed: 33.3 rpm and…

6, Lock the suspension caps by tightening 2 set screws between the suspension o-rings, as shown. Connect the control cables on the Sparta. There is a 3-pin connector and a 4-pin connector. Connect the control cables to the power supply, again being careful to connect the 3-pin and the 4…

2, THANK YOU for purchasing the Kronos Sparta turntable. The Sparta has been designed to produce the best sound reproduction possible from a vinyl record. It is built without compromise for this single purpose. It is a state-of-the-art hand built instrument. Each Sparta is individua…