Risco LightSYS Operation & User’s Manual

46, LightSYS User Manual Page 46 Tamper: A device that prevents system hardware from being tampered with by triggering an alarm whenever a hardware component is opened. Fault Reporting: If required, your security system may also report to the alarm receiving center any faults or malfunc…

10, Mastering Your System LightSYS User Manual Page 10 If your system has two or three partitions, the LCD displays the system name, date, time and the status of each partition. A status letter represents the partition’s status, as follows: AR: Partition Set NR: Partition Not Re…

23, Setting and Unsetting Page 23 LightSYS User Manual Remote Set/Unset Using a Phone If your LightSYS is equipped with the voice module you can perform setting/unsetting operations and operate the system from a remote touch‐tone phone by initiating a telephone call to or from the sys…

47, Risco LightSYS Page 47 LightSYS User Manual Appendix C – Scheduling Tables Use the following table to define each of the weekly schedules. Weekly Schedule: _________ Schedule Name: __________ Schedule Type Parameter Definitions Set / Unset  Partition 1 2 3 4 5 6 7 …

27, User Functions and Settings Page 27 LightSYS User Manual Setting / Changing User Codes The user assigned the grand master authority level can change all user codes but cannot view the digits in the user code fields. Users with other authority levels can only change their own codes. …

40, User Functions and Settings LightSYS User Manual Page 40 Operation GM U En. Advanced √ - √ Switch AUX: Interrupts the power supplied to the system's smoke detector(s) for a predetermined interval, thus resetting and "readying" them for sub…