WEISS MEDUS Owner's Manual

10, OWNERS MANUAL FOR WEISS MEDUS D/A CONVERTER Remote Control The Remote Control allows to control the following parameters: - basic output level with the gain trim keys as described above - output volume in the digital domain with 0.5dB steps over a range of 60dB. With the …

8, OWNERS MANUAL FOR WEISS MEDUS D/A CONVERTER Input Source Connection, Selection and Synchronization Connect sources with sampling frequencies of 44.1, 48, 88.2, 96, 176.4 or 192kHz to the input connectors at the back of the unit. Note that there are a total of four inputs. The fol…

5, OWNERS MANUAL FOR WEISS MEDUS D/A CONVERTER Outputs: Our discrete OP-AMPs are also used in the output stage, two per audio channel for a differential output. Output levels can be set between –4.0dBu and +27.0dBu (6dB less on asymmetrical outputs). The level setting …

32, OWNERS MANUAL FOR WEISS MEDUS D/A CONVERTER Global Settings / Bus: Master: Is the device which is sync master on the virtual bus in case multiple devices (“MEDUSs”) are connected. Sync Source: The clock to which the MEDUS should sync to. Usually this is the MEDUS’ interna…

7, WEISS MEDUS OWNERS MANUAL FOR WEISS MEDUS D/A CONVERTER Operation Unpacking and Setup of the MEDUS Carefully unpack the MEDUS. The following items should be enclosed: • The MEDUS D/A Converter unit • The MEDUS Remote Control unit • This Owner’s Manual • A Certif…

12, OWNERS MANUAL FOR WEISS MEDUS D/A CONVERTER Technical Data Digital Inputs: (3) XLR connectors, (1) Toslink connector (optical) (3) RCA connectors (1) USB connector All inputs accept professional or consumer standard , i.e. accept AES/EBU or S/PDIF signals Sampling Frequenc…