X4-TECH A-1200 Instruction Manual

5, 8 9 › Never touch the power plug with damp or wet hands. There is the risk of electric shock! › Make sure the device is properly ventilated during operation and never operate it in constricted areas, such as for example in a bookcase or shelf. Never block ventilation openings with pa…

10, X4-TECH A-1200 18 19 Chapter 3 The device Chapter 4 Setup › The device should be set up on a stable and level surface. Make sure that proper ventilation is provided to ensure adequate air circulation and that a minimum distance of 10 cm is maintained above and behind the device. If you would…

6, 10 11 9. DAB: Selects the DAB input as source 10. FUNCTION button (sound selection) 11. CONTROL dial for volume or sound settings (FUNCTION mode) 12. Power button on/o 1. Power inlet 2. Warning symbol 3. Loudspeaker outputs 4. LINE-OUT output 5. DAB stereo source …

2, 2 3 Table of contents 5 Chapter 1 Intended use 5 Explanation of symbols 6 Chapter 2 Safety information 9 Before use 10 Chapter 3 The device 10 Features 10 The A-1200 12 Description of remote controls 17 Inserting batteries into the remote controls/Battery infor…

14, 26 27 Carry out a technical safety inspection on a regular basis, e.g. check if the power cable or housing may have become damaged. If there is reason to believe that the device can no longer be operated safely, then disconnect it immediately from the power supply and secure it again…

13, 24 25 Chapter 7 TroubleshootingChapter 7 Troubleshooting The device you have just purchased is equipped with state-of-the-art technology and is safe to operate. Nevertheless, problems or malfunctions may occur. Before contacting a service technician, refer to the following pos…