ZALMAN CNPS11X Extreme Operation & User’s Manual

5, 5 .COM English 5. Installation A . Intel Socket Installation 1) Intel Socket 2011 Installation - Unfasten the Bolts on the Cooler’s Base one thread, insert the Intel Clip between the Cover and the Base, and then refasten the Bolts. Make sure the Intel Clip’s ingresses are �…

4, ZALMAN CNPS11X Extreme 4 .COM EnglishEnglish 4. Installation Requirements CNPS11X Extreme CNPS11X Performa 1) Space Requirements 2) Air Guide Removal 3) Cooler Orientation 100 mm 137 mm 155 mm The cooler’s installation requires an unobstructed space of 137mm(width), 100mm(length), and 155mm(height), with th…

11, 11 .COM English ④ Disassemble the motherboard’s Clip Support. ⑤ Align the Backplate’s Nuts with the motherboard’s Clip Support’s installation holes and fasten to the motherboard. M/B M/B M/B Silver Bolt B (3mm) ⑥ Apply a suitable amount of the include…

6, 6 .COM EnglishEnglish Socket 775 Socket 1156/1155 Socket 1366 Take note of the orientation of the Nuts and the Side Caps. X O Caution 2) Intel Socket 1366/1156/1155/775 Installation ① Install Bolts to the Backplate according to the Socket Type and secure with Si…

8, 8 .COM EnglishEnglish Please make sure that PWM Control Mode is activated in the motherboard’s BIOS settings. Caution ④ Align the Backplate’s Nuts with the motherboard’s Clip Support installation holes and then fasten to the motherboard. M/B ⑥ Connect the…

10, 10 .COM EnglishEnglish X O Take note of the orientation of the Nuts and the Side Caps. Caution ③ Remove the Sticker Cover from the Lower Tier of the Loading Block and attach to the Backplate. Caution Please make note of the orientation of the Loading Block�…