Santon R25 Installation And User Instructions Manual

12, 12 GUARANTEE This product is guaranteed against faulty materials and manufacture for a period of 2 years from the date of purchase provided that: 1. The unit has been installed in accordance with the Installation and User Instructions and all relevant Codes of Practice and Regul…

5, MULTIPOINT 5 5 2.6 Make the electrical connection to the heater and set the controls. Do not switch on. See section 3. 2.7 Fit a straight 3/4 BSP female to 22mm compression fitting to the 3/4 BSP outlet boss. 2.8 Locate the heater onto the top fixing collars. Fit the two bottom fixings an…

7, MULTIPOINT 7 7 Control Thermostat : The heater is fitted with an adjustable Cotherm TSD 01105 rod type thermostat. This does not have a calibrated scale. The minimum setting (approximately18°C) is indicated by - and the maximum settting (approximately 70°C) by +.…

8, Santon R25 8 5.4 Open the isolating valve on the inlet. Open a hot water tap on the outlet, turn on mains water supply to the heater. 5.5 Allow unit to fill and run the hot tap for a short while to purge any air and flush out the pipework. Close the hot tap. 5.6 When the float valve has shut off che…

1, MULTIPOINT 1 Installation and User Instructions Rectangular Combination Water Heaters Models: R25, R45, R70, R115 PACK CONTENTS Heater, Float Valve & Arm, Float, Overflow Fitting, Dip Tube, Screened Breather, Wall Mounting Collars & Installation and User Instructions. WARN…

4, 4 2.1 Decide on the best position for the heater taking account of paragraphs 1.2 and 1.3 and inlet and outlet connections. The float valve and overflow assembly can be fitted on either side of the heater. 2.2 Using the template provided mark the position of the top two fixing holes. Before…