Wood and Douglas RSX150G Operation & User’s Manual

19, Wood and Douglas RSX150G 1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007 19 This can be achieved by any equipment with an RS232 serial port which can send the required byte. Only the TXD (to pin 9) and ground (to pin 5) connections are required. Figure 16 - Serial channel change connections …

7, 1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007 7 1.2.2 Connections to a PC The standard version of the RSXn50 may be connected to the serial port of an IBM- compatible personal computer using the connections shown in Figure 8. Figure 8 - Connections to a PC serial port v…

36, 36 1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007 APPENDIX: TERMINAL KEYSTROKES These keystrokes generate a serial byte output from a standard (e.g. VT100) terminal which can be used to select channels 0 to 127 in serial mode. For example, to select cha…

3, 1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007 3 INTRODUCTION The Wood & Douglas RSX Series Radio Modems are high-speed intelligent radio modems providing a half-duplex data link over a distance of up to several kilometres, depending on the frequency chosen. Th…

17, 1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007 17 To set the Rx Offset for the whole table, select Parameters > Rx Offset and pick from the list of possible values. 2.2.3.4 Programming Up To 80 Channels Individually Double-click the Tx Frequency value for the channel…

30, 30 1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007 4.4 TECHNICAL SPECIFICATIONS Frequency range : RSX150G 100 - 225MHz (banded, fixed at manufacture) RSX450G 400 - 470MHz (banded, fixed at manufacture) RSX850G 868 - 870MHz Usable band depends on frequency, please e…