Apperson Datalink 3000 Operation & User’s Manual

10, 9 8 Calibrate My Scanner Calibrate the scanner by placing the calibration sheet face up in the scanner and pushing the “scan/pause” button. Once the calibration sheet has been properly scanned, the display should read “calibrated.” How To… aa aaaba aaaba aba aaaba aaaba aaaba a…

11, Apperson Datalink 3000 Clean My Scanner It is recommended that you clean your scanner at least 3 times per year or before any high volume scanning projects. We suggest using compressed air to clean the scanner and sensors. You may access the sensors by lifting the top portion of the scanner up (gure…

14, Copyrights © 2009 - 2012. Apperson All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Printed in USA To order supplies or answer sheets for your scanner, you may visit our online cat…

12, 11 10 My answer sheets are not feeding into the scanner: • Your stack of answer sheets may not be properly inserted into the feed tray. Remove the answer sheets and rest the long side of the stack on your desk. Loosely shake the stack to ensure the sheets are ush along the long side a…

2, 1 About the DataLink 3000 Scanner ...................................................... 1 About the DataLink Connect Software ................................................ 1 Quick Start - Setting Up Your Scanner ................................................ 2 Install…