JS Automation Corp CPU-2616 PCI-104 Operation & User’s Manual

10, 2.2.3 J3: RJ45 LAN /Adapter Connector with LED indicators FB4605A is a RJ45 connector with 2 LEDs for LAN. The left side LED (orange) indicates data which is being accessed and the right side LED (green) indicates on-line status. (On indicates on-line and off indicates off-line) J3 prov…

28, 4.3.7 Security Option This field enables password checking every time when the computer is powered on or every time when the BIOS Setup is executed. If Always is chosen, a user password prompt appears every time and the BIOS Setup Program executes and the computer is turned on. If …

52, 51 Line Status Register (LSR) Bit 0: Data Ready (DR) Bit 1: Overrun Error (OR) Bit 2: Parity Error (PE) Bit 3: Framing Error (FE) Bit 4: Break Interrupt (BI) Bit 5: Transmitter Holding Register Empty (THRE) Bit 6: Transmitter Shift Register Empty (TSRE) Bit 7: Must be…

9, JS Automation Corp CPU-2616 PCI-104 2.2.1 J4: Power Connector (4-pin 2.5mm JST) Note: Be careful with the pin orientation when installing power connector. A wrong connection can easily destroy your CPU2616 board. 2.2.2 J2: External Power/HDD LED’s Indicators & Reset Header The Power and HDD LED’s has two di…

41, 40 5.6.2 Watchdog Timer Enabled To enable the watchdog timer, you have to output a byte of timer factor to the watchdog. The following is a Turbo C++ program, which demonstrates how to enable the watchdog timer and set the time-out period at 6 seconds. #include “stdio.H”…

31, 4.4.5 Onboard Audio This field specifies the internal Audio Control. Available Options: Disable, Enable Default setting: Enable 4.5 Peripheral Setup This section describes the function of peripheral features.  4.5.1 On-Chip Primary IDE Channel 1 This field specifies the ID…