Kangaroo Hillcrest series Owner's Manual

4, The control cable plug aligns with the receptacle by a lug and corresponding notch arrangement. Always handle the plug when connecting or disconnecting the control cable. Pulling on the wire can cause damage. Also, keep the plug and receptacle clean. CABLE PLUG AND RECEPTACLE HILLCREST ASSEMBL…

2, Damage in shipment by U.P.S.: 1. You MUST notify U.P.S. immediately so that they can inspect the damage. U.P.S. will return the damaged merchandise to us. 2. Notify our company as to the nature of the damage, parts missing…

9, IMPORTANT WARNING: NEVER tow your Hillcrest. Any damage due to failure to observe this warning is NOT covered by your Warranty. Graphics for Quick Remove Wheels …

10, Technical Specifications Motor: High torque, 2-pole armature/permanent magnet, 12-volt DC. Drive Train: Double reduction, sealed maintenance-free self- lubricating gear drive with differential and direct-drive hubs. Controls: All solid-state motor control, 45 amp capacity, all circuitry under ove…

12, Kangaroo Hillcrest series WARRANTY KANGAROO PRODUCTS CO. LIMITED WARRANTIES Your KANGAROO MOTORCADDIE is manufactured to rigorously upheld specifications necesary for this type of product in order to provide dependable service to the golfer. It incorporates years of research and development involving construction…

8, Hillcrest Wheel Removal The wheels on your Hillcrest are designed to be easily removed and replaced. Each wheel is held in place on the end of the axle by a spring-loaded retaining tab located on the inner side of the wheel. This retaining tab fits into a groove formed on the ax…