Kantronics KPC–3 Plus Operation & User’s Manual

6, 6 LICENSEE ACKNOWLEDGES HAVING READ AND UNDERSTOOD THIS AGREEMENT AND AGREES TO BE BOUND BY ITS TERMS. LICENSEE FURTHER AGREES THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN LICENSEE AND LICENSOR AND SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WR…

108, 108 You‘ll get the usual disconnect message from your TNC, as noted. If however, your distant partner, in this case NØKN, disconnects the link, you‘ll see the following (due to the ―STAY‖ in ―C NØAPJ STAY‖ in the example earlier): ###DISCONNECTED BY NØAPJ AT NODE KC ENTER COMM…

75, 75 If you fail to properly decode the password, the TNC will send three new lines of numbers. You will be given a maximum of three attempts to properly decode the password string. If you fail in three attempts, the TNC will disconnect you and disable connects to the MYREMOTE …

74, 74 Within 1 second type a second <Ctrl+C> Within 1 second type a third <Ctrl+C> Wait 1 second and the cmd: prompt should appear If the guard time of one second before and after the three <Ctrl+C>s is not there, the TNC assumes that they are data and send…

199, 199 Entering LONG will cause the TNC to display the status of all streams allowed by MAXUSERS, PBBS, NUMNODES, and MYREMOTE. The current KA-NODE input and output (IO) stream is also indicated. A pound sign ‗#‘ (octothorpe) indicates that there is unacknowledged data in the buffers f…

209, Kantronics KPC–3 Plus 209 Appendix A: Advanced Installation This appendix gives you additional information on installation and configuration beyond that given in the chapter on “Installing your KPC-3 Plus”. We assume you have already read that chapter. Precautions The KPC-3 Plus is grounded th…