La Crosse WT535 Instruction Manual

5, BATTERIES POWERED WITH THE USE OF AC/DC ADAPTER If the Projection clock is first powered by batteries and the power adapter is subsequently used for extended period of time, the main power source of the Projection clock will switch to AC/DC power. The batteries will then act as a backup power sou…

3, 3. When the batteries are inserted, all the segments of the LCD will light up briefly and a “beep” will sound. The Projection clock will now start receiving the DCF time signal. After approximate 3 to 5 minutes, the DCF time will be displayed. 4. If reception is not successful with…

12, 1. The year digits start flashing. Use the MODE/MIN key to set the year (the range runs from 2000 to 2029). 2. Press the SNOOZE key again to enter the month and date setting (flashing). 3. Use the AL/HR key to set the day and the MODE/MIN key to set the month 4. Press the SNOOZE key ag…

8, towards the general direction of the Frankfurt/Main transmitter (avoid positioning within close proximity of metal frames or structures). Note: Users may be located in areas where atmospheric disturbances are the direct cause for not receiving the DCF-77 frequency signal. During n…

14, La Crosse WT535 MAINTENANCE: • Avoid placing the alarm clock in areas prone to vibration and shock as this may damage and inaccurate readings. • Avoid exposure to sudden changes in temperature such as direct sunlight, extreme cold and wet or moist conditions. • When cleaning the display and casing,…

6, : Toggle between indoor temperature, seconds, alarm time, and date display : Enter time zone setting mode : Set the minutes, weekday and month : Stop alarm and snooze function : Back-light-On : Set the brightness level of the projection (in A/C power mode) (4 levels: H…