Lacrosse PCR156 Instruction Manual

10, Receiving the DCF Time Code The projection clock will automatically receive the DCF time code every hour. Besides, you can force the clock to receive the signal by pressing“Wave” for 3 seconds. It will take 3-5 minutes to receive the radio signal. It the time signal is…

4, To install the AC-DC adapter for Continue Projection:- Installation: Use 2 x “AAA”, 1.5V batteries and AC-DC adapter. Important: Please make sure your household voltage matched with the voltage supported by the adapter, or it will damage your clock and adapter. INDICATOR STA…

6, Manual Time Setting The system date and time can be set by pressing MODE for 3 seconds in Time/Temperature display with the [ ] icon turn off. Setting the Time * Press MODE again : the year digits are blinking and can be set by pressing ▲ or ▼ key. * Pres…

7, update. 2. During any setting mode, press and hold ▲ or ▼ key for 2 seconds for fast setting. 3. View week of the year, press ▼ key will toggle between the day of week and the calendar week. Calendar To change the weekday display from one language to another languag…

5, * After the batteries are installed, the LCD will turn on and beep for 2 seconds. The clock will automatically search the radio signal. It takes about 3-5 minutes to finish this process. * If the radio signal is received, the date & time will be set a…