Lexmark MS510 Series Service Manual

112, Lexmark MS510 Series Action Yes No Step 4 Try a different toner cartridge. Did this fix the problem? The problem is solved. Go to step 5. Step 5 Check the connections between the cartridge gearbox and the controller board. Is the cable properly connected to the cartridge gearbox and to the controller board? G…

57, 23y.xx paper jam messages Error code Description Action 230.01 Sheet covering internal duplex sensor during warm up. Go to “Duplex service check” on page 57. 230.02 Paper jam around internal duplex. 230.03 Internal duplex sensor never made by leading edge of page. 230.04 Page in duplexer ah…

5, Replace imaging unit, 0 estimated pages remain [84.xy] .................................................................................79 Replace maintenance kit, 0 estimated pages remain [80.xy] ...........................................................................79 Replace unsuppor…

67, Action Yes No Step 8 POR into the Diagnostics menu and perform a feed test: Diagnostics Menu > Input Tray Tests > Feed Test > Select an option tray Does the pick/lift motor gearbox pass the test? Go to step 9. Replace the option tray. Step 9 Does the error remain? Contact the next…

180, 6 Release the latches (C) to remove the right cover. B C Tray present sensor removal 1 Remove the right cover. See “Right cover removal” on page 179. 2 Disconnect the cable (A) from the tray present sensor. 3 Pry to remove the sensor retainer (B). Note: The retainer is secured to the sen…

93, CTLS service check Action Yes No Step 1 Check for loose toner blocking the CTLS. Is it free of any loose toner? Go to step 2. Clean the CTLS. Step 2 • Check the cable PCN3 for proper connection to the power supply. • Check the CTLS cable for proper connection to the controller board. Are…