Kirisun PT5200 Instruction Manual

10, Kirisun PT5200 12 11 during the scanning pause, the radio will transmit from the currently working channel 5) Last called When pressing PTT button, the radio will transmit from the last channel that received a call. 6) Last used When pressing PTT button during the scanning, the radio will t…

8, 8 7 Make a Call To make a call, select the desired channel, press and hold the PTT button, and speak in normal voice. Please keep your mouth 3~8 cm away from the microphone. Receive a Call Release the PTT button to receive a call. Select the desired channel, adjust th…

3, areas or on unstable surfaces. Do not modify this radio for any reason. Refer service to qualified licensed or certificated technicians only. Notice to the User: Government laws prohibit radio communication without permission in government districts. Illegal operation is subject t…

14, can receive the call and LED flashes orange. After decoding successfully, the radio will work according to the decoding call response set by the dealer. 2) 5-Tone Encoding If the PTT ID on the channel you select has been set with 5-Tone, 5-Tone signaling will be transmitted when making a call. O…

7, BASIC OPERATION 65 Switch On Switch on the radio by turning the Power/Volume switch clockwise till a click is heard, then the radio will be in the state of stand by and you will hear a beep if the dealer has set it. And then you will hear voice annunciation of the current channel numb…