KTI KGS-510F Installation Manual

42, -42- Configuration Description Port Port number Insert Tag Activate tagging (Insert a tag to the packet) Enable - set to activate tagging Disable - set to disable tagging function Untagging Specific VID No tag insertion if VID of packet tag information matches [Untagged VID] Enable - set to …

54, -54- 4.12.1 802.1p Mapping Configuration Description Port n Port number n tag m 3-bit User priority tag value m ( range : 0 ~ 7 ) Priority class Mapped priority class for tag m on Port n Class 3 ~ Class 0 [Apply] Click to apply the configuration change [Refresh] Click to refresh current co…

34, KTI KGS-510F -34- 4.6.3 Simplified Tag-based VLAN Mode Configuration Description VLAN Groups Click to configure VLAN group table VLAN Per Port Click to configure per port simplified VLAN settings 4.6.3.1 VLAN Groups4.6.3.1 VLAN Groups 966BConfiguration Description 967BGroup Group number 968 BVID VID of the V…

58, -58- 4.14 Statistics Overview Statistics Description Port Port number Tx Bytes Total of bytes transmitted on the port Tx Frames Total of packet frames transmitted on the port Rx Bytes Total of bytes received on the port Rx Frames Total of packet frames received on the port Tx Errors…

37, -37- Ingress filtering setting [Drop Untag] = Disable Egress rule setting [Egress Tagging] = Specific Tag Ingress Packets Egress rule Untagged packets Tagging with Ingress Default Tag* (Tagging) Priority packets Tagging with Ingress Default Tag* (Tagging) Tagged packets Egress wit…

9, -9- Port control Port configuration control via software management Storm control Broadcast, Multicast storm protection control via software management Aggregation Link aggregation (port trunking) Port Mirroring Mirror received frames to a sniffer port Software Management Functions Interfaces Web b…