LifeSize Focus Installation Manual

11, LifeSize Focus Installation Guide 11 3. Connecting the Camera to the Codec To connect the camera to the LifeSize codec, insert one end of the camera cable into the port on the back of the camera and insert the opposite end into the port marked with the camera symbol on the back p…

9, LifeSize Focus Installation Guide 9 2. Removing the Lens Cap Remove the lens cap from the camera. Removing the lens cap also exposes the status LED and the infrared (IR) sensor. The IR sensor detects signals from the LifeSize remote control up to eight meters (26 feet) away when you …

8, LifeSize Focus 8 LifeSize Focus Installation Guide Using the Tripod Socket The tripod socket and a screw secure the pivot collar to the camera. To expose the tripod socket for use with a tripod, loosen the screw until the pivot collar detaches from the camera. Note: The screw remains attached to the piv…

5, LifeSize Focus Installation Guide 5 Installing LifeSize Focus LifeSize Focus includes the following components: Component Description A camera with lens cap (A-1), pivot collar (A-2), and microphones (A-3) B desktop mount C display mount D camera cable (3 meters) E documentation CD A B…

10, 10 LifeSize Focus Installation Guide The status LED indicates the status of the camera as follows: LED Color Status No color Power is off. Purple flash The camera is initializing. Blue flash The camera software is upgrading. Dim blue The camera is receiving power and is inactive. Br…