AeroGarden AeroGarden PRO Instruction Manual

5, Page 5 Clean Pump (continued) Insert the Pump back into the Pump Tower making sure that: • The Rubber Feet on the Pump are facing up. • The Face Plate is facing toward you. • The Pump Wire goes behind and underneath the Pump. • Pump is securely seated in the tube in the Pump Tower. …

2, Remove & Save AeroGarden Water & Seed Pods Skip this step if your AeroGarden is not planted and proceed to Step 2 on page 3. Unplug your AeroGarden. Remove Bowl from Base. Remove Grow Surface and place in sink (or on towel) as roots will drip water. Pour water from Bowl into shallow dish …

4, Page 4 Clean Pump A Continued on next page Remove Impeller Cover with small pliers, tweezers or ngers. B B C Impeller Hole Impeller Cover Impeller Disassemble Pump With the Pump removed from the Pump Tower, but still connected to the Grow Surface: Use a butter knife to pry o Fac…

6, Page 6 Reassemble Pump With Grow Surface upside down, insert the Pump back into the Pump Tower making sure that: • The Rubber Feet of the Pump are facing up. • The Face Plate is facing toward you. • Pump is securely seated in the tube in the Pump Tower. • The Pump Wire goes behind and u…

3, AeroGarden AeroGarden PRO Page 3 Remove Pump and Clean Pump Tower Follow the steps whether your are cleaning a Pump from a planted AeroGarden or an empty AeroGarden. Unplug your AeroGarden. Remove Bowl from Base. Remove Grow Surface from Bowl and bring to sink or set on towel. Hint: Lift the View Door and slide one…