Mackenzie MacFi-se Operation & User’s Manual

7, Step 1 – Make all desired power, audio out, configuration switch and I/O connections to the unit and power up. Unit will perform a self test and enter idle mode. Step 2 – Provide a momentary or maintained contact closure between the message input (Connector 1, terminals 2-9) and com…

11, Mackenzie MacFi-se If a message is setup for recording, the record LED will be blinking and the message location will be displayed on the Message Number Display, pressing this button will initiate the recording process. Pressing it again, with the recording in process, will stop the recording. Pressing…

1, __________________ __________________ __________________ Return Address MACKENZIE LABORATORIES, INC. 1163 Nicole Court Glendora, CA 91740 USA --------------------------------------------------------------------------------------------------------------- OTHER MACKE…

3, NOTES __________________________________________________________________ __________________________________________________________________ __________________________________________________________________ _______________________________________________________________…

10, Play Method Defines playback mode of Message sequences. Message sequences are comprised of the message material, number of plays and delay between plays. 5 6 Standard operation - details below Play one sequence per closure - details below Play wh…