AgfaPhoto DC-1033m Operation & User’s Manual

14, AgfaPhoto DC-1033m AgfaPhoto DC-1033m 9 Using the LCD Monitor The LCD monitor is used to compose images while recording, adjust settings and replay images. The following indicators may appear on the LCD monitor while recording or playing back images. REC mode 1 Recording mode ( page…

55, AgfaPhoto DC-1033m 50 Copying the Files You may copy the data from the camera’s internal memory to the memory card for convenience. Be sure you have inserted a memory card into your digital camera. Set the camera to the PLAYBACK mode. ( page 13). Open the menu. y Press the…

16, AgfaPhoto DC-1033m 11 Changing the LCD Status Press the SET/DISP button changes the LCD status as shown below:  REC mode (A) OSD on (B) Full OSD (C)Guide line (D) OSD off y Use the “Guide line” to compose images easily before shooting images. �…

25, AgfaPhoto DC-1033m 20 Menu Item Functions USB [Computer] / [Printer]: Sets the USB mode to connect the camera with a printer or computer ( page 54). Start-up image Sets a recorded image as the start-up image ( page 52). Format To erase all data stored in the memory c…

39, AgfaPhoto DC-1033m 34 Recording Movie Clips You can record movies with the camera, the available recording time depends on the capacity of the memory card. Videos can be recorded until the maximum memory capacity has been reached. However the length of a single video may b…

41, AgfaPhoto DC-1033m 36 Recording a Voice Memo You can add a voice memo to the still images after you record it. Turn the power on, and set the camera to the PLAYBACK mode ( page 13). Press or to select a still image that you want to add a voice memo to. y If the image alread…