Logic Data Systems L-5500 Manual 

19, Page 16 Note: Should you experience problems connecting to the web page, reset the L-5500 unit by clicking RESET on the top right of the screen and try reconnecting to the web page. 4.4.2. Provisioning with Sprint L-5500 cellular routers configured for Sprint are set to activate by defa…

48, Page 45 5.9. GPS The GPS page allows the user to see the GPS status and configure remote or local delivery of GPS position reports. Viewing the GPS data from a local or remote PC requires a UDP port listener program be installed on the PC. Any UDP listener will work provided you can s…

45, Page 42 Remote IP Address: The L-5500 is considered the left local side. The remote IP is the address of the right remote side where the unit will connect to establish a tunnel. Remote Subnet: If you tick the Enabled checkbox, enter the IP netmask protected on the remote side, for instance …

6, Logic Data Systems L-5500 Page 3 2. PRODUCT OVERVIEW 2.1. Device Identification 2.1.1. Label Information The label contains the part number, serial number, MAC ID, FCC ID and the IMEI numbers in both Hex and decimal format. 2.2. General Description The L-5500 Modem from Logic Data Systems is the…

17, Page 14 Figure 5 - L-5500 radio modem Home page 4.4. Provisioning the L-5500 Radio Modem IMPORTANT NOTE: The L-5500 cellular radio modem requires an active cellular data service contract for provisioning. Verify that your cellular service contract is a data service contract with p…