Logipix LOBJ-05P Installation Manual

26, Logipix LOBJ-05P Installation Guide 3. Suit the Hybrid Extender to the cage nuts and fix it by tightening both screws! Connecting the analog cameras • Connect the BNC cables of the analog cameras to the BNC connectors of the Hybrid Extender. The connectors can be found at the back of the Hybrid extende…

22, Installation Guide Fix the camera on the Mounting bracket • At first lead the cables of the camera through the mounting bracket! • Place the mounting bracket to the connecting part of the case on the top. The connecting part of the case is designed with an edge on it. The three tightening …

51, Installation Guide 6. To find the right focus, use the ABF Position slider! You can adjust it manually, or you can use the Automatic focus search. There is a graph between the sliders, which shows the actual focus value. In case of automatic adjustment the program m…

55, Installation Guide Configuring the analog cameras 1. Click on the Configure icon on the main software surface! 2. Select the Hybrid extender in the left tree to which the analog camera is connected! Click on the '+' sign near the Hybrid extender! The cameras of the device ap…

62, Installation Guide profiles in the Video Monitor. If this will be the primary Monitor profile at the workstation, adjust “1”! 4. The previously registered devices can be found in the left tree. Choose the camera which you would like to place on the profile, then Drag & Drop…

32, Installation Guide Connecting the Logipix cameras and the Hybrid extenders to the LNVRs • All the Logipix cameras, the Logipix Full HD cameras, the Logipix Full HD PTZ cameras and the Logipix multi-megapixel cameras and the Logipix hybrid extenders must be connected to Local Network Sw…