Masotti TB6 Operation & User’s Manual

5, TB61_1ENG TB6 User’s manual 5/8 On the left side we can find output jack, programming switch and power supply plug. On the upper side there are the send/return jacks for the loops, easily identified by the graphics of the front panel. Normal functioning. Normal func…

2, TB61_1ENG TB6 User’s manual 2/8 Welcome to Masotti Guitar Devices world and thank you for your choice. Our challenge is to bring new ideas in guitar amplification, exploring new techniques and adopting the "no compromise" philosophy. TB6 is a t…

4, Masotti TB6 TB61_1ENG TB6 User’s manual 4/8 General descripiton. TBS is a floor looper, completely true bypass, that manages up to six effects both in direct mode (by corresponding stomps) and via MIDI. Noise switch is absent tanks to our clickless technology based on a microprocessor that acts on t…

7, TB61_1ENG TB6 User’s manual 7/8 suppy that powers TB6 cannot supply any other effect or device, please use a dedicated unit. Always use a CE/FCC marked power supply, with cable and plug not damaged. Chech both input and output voltage before use it. Effects sequence…

6, TB61_1ENG TB6 User’s manual 6/8 6) Repeat 4 an 5 steps as necessary. 7) Move the prog switch in low position; status LED becomes green. Now TB6 is in normal mode and you can start to play and enjoy it! You can move to normal mode to prog mode and vice-versa in any time…