Massive Audio CORE-1 Operation & User’s Manual

15, CORE-1 features 4 stereo output groups (8-CH RCA outputs). Each group can be individually configured to suit the type of transducer (speaker) that you wish to use, for example, subwoofers, midbass, tweeters and more. For example, a tweeter without an appropriate High Pass…

16, Enter the distances found on the “Measured Distance” fields and hit “Calculate!” CORE-1 will automatically calculate and apply optimum values for Balance and Time Alignment, so you don’t have to worry about doing it manually. This will result in perfect soundstage, as if al…

32, 6- Make sure that the correct path was chosen and click Next. 7- Wait for installation to complete, and click Close. …

5, Massive Audio CORE-1 OVERVIEW / HARDWARE INSTALLATION: Input Panel. Power source connector: Connect to your vehicle’s battery and head-unit. Utilize a small flat screwdriver to secure the wires connection to the plug. The plug is connected “up side down” to the Unit, so make sure to …

13, Step 4: Once the automatic device driver installation is complete, open CORE-1 software from your Desktop shortcut: CORE-1 Software Main Screen Click on the drop down list and select the COM port: Please note that the available COM port will vary accordin…

36, Typical original wiring diagram (factory unmodified) Modified wiring diagram with Dummy Load resistors and “speaker wire to RCA” converter. …