Masterclock CLDNTD12 Operation & User’s Manual

10, Masterclock www.masterclock.com 10 Connections Ethernet PoE: Connect the CAT5 Ethernet patch cable (included) into the RJ45 socket, located on the back panel. DC: Insert the DC power cord into the 2.1 mm connector located on the back panel. …

13, Masterclock www.masterclock.com 13 Configuration Masterclock CLDNTD12 clocks maintain their configuration data in non-volatile flash memory, even when the power is off. The CLDNTD12 clocks are configured on screen using WinDiscovery software. The factory default configuration: SET…

4, Masterclock www.masterclock.com 4 Features Your new CLDNTD12 digital-analog clock features: RTC (Real Time Clock) back-up maintains time during loss of power and/or loss of NTP reference Time Zone offsets (to one second resolution) supports any biasin…

17, Masterclock www.masterclock.com 17 WinDiscovery The WinDiscovery software application is a clock setup and configuration program that operates in the Microsoft Windows operating system and is supplied FREE with your CLDNTD12 device. INSTALLING WINDISCOVERY To install the W…

24, Masterclock www.masterclock.com 24 Time Zone Offset Modify the time zone by clicking the [Time Zone] button. This opens a new window that gives you a list of time zones, including descriptions to help with the selection. Select the desired time zone and click [OK] to close the …

22, Masterclock CLDNTD12 Masterclock www.masterclock.com 22 NTP Addressing Modes UNICAST (QUERY) NTPS clocks and devices support the Unicast Method of NTP (Network Time Protocol) packets transfer. The unicast method involves direct transfer of requested information…