Neopost HCVS-1 Operation & User’s Manual

36, Neopost HCVS-1 36 Page n of m (only BCR) BCR uses the code ‘page n of m’ to complete a set. If n is less than m, the sheets are accumulated. If n = m, this is the last sheet of the set and the set will be inserted. Example of OMR Code In the figure the legend for the following example is shown. In thi…

28, 28 4. Press Save to save the job with the entered settings under the specified job number and name. To name a job, see 4.2.6 ”Job Name” on page 26. 5. Press the 1x button to verify that the insert position and address position are correct (see 7.3.1 ”Insert Position” …

47, 47 ENGLISH Flap is wrinkled and sometimes not opened. Envelope not within specifications. Check specifications and change envelopes if needed. “Envelope and Insert Specifications” on page 51 Flap sticks. Store envelopes according to specifications. “Envelope and Inser…

58, 58 Tray Contains a stack of paper for a printer or inserter. This paper is supplied to the system for further processing. Vertical transport The vertical transport section between feeders and collator. Z-fold A Z-fold means that a document is folded twice in such a way that each folded flap is …

40, 40 5.4.3 Adjust Side Guides Adjust the side guides: 1. Take a stack of documents/BREs and place them in the feeder tray. BREs with flap down and leading (top side pointing to system). 2. Adjust the side guides by turning the thumb wheel G so the documents/BREs just fit and can move wit…