mcmurdo Smartfind M10 Operation & User’s Manual

29, 10 on screen instructions and assign the correct file path of the USB driver to complete the installation. You can also install the USB driver via the Device Manager in the Control Panel, (detailed USB driver installation instructions are supplied on the CD with the USB driver). To…

47, 28 5.3 SD Card Data Logging The Smartfind M10 records voyage data onto a SD card in log files in a .txt format. The compatible SD card types supported by the M10 are listed as followed: Standard “SD” with maximum 2GB size Supported data format: FAT12/16 Standard “SDHC�…

34, 15 4.4 VHF Antenna Installation The quality and positioning of the antennas are the most important factors in dictating AIS performance. It is recommended that a VHF antenna with omnidirectional vertical polarization and specifically tuned for AIS operation band be used. Since the r…

38, 19 When wiring the M10 to a NMEA0183 AIS-ready equipment, please refer to your equipment manual first. The Smartfind M10 supports two NMEA0183 ports and each can be configured to 4800, 9600, or 38400 baud rate independently. The default baud rate for both ports is 38400. Use the provided M10 …

68, 49 Orolia Limited, Silver Point, Airport Service Road, Portsmouth, Hampshire, PO3 5PB, UK Telephone: Int + 44 (0) 23 9262 3900 Fax: Int + 44 (0) 23 9262 3998 Web: www.mcmurdomarine.com Email: [email protected] An Orolia Group Business …

21, mcmurdo Smartfind M10 2 shore to ship transmission of information. Networked AIS Base Stations can assist in providing overall maritime domain awareness.  AIS AtoN (Aids to Navigation): provides an opportunity to transmit position and status of buoys and lights through the same VDL, which can then…