MCZ TOBA HYDRO 22 Installation Manual

5, 3 1 - WARNINGS AND WARRANTY CONDITIONS Technical Dept. - All rights reserved - Reproduction is prohibited • Any type of tampering or unauthorised replacement with non-original spare parts could be hazardous for the operator’s safety and relieves the company from any civi…

3, 1 INTRODUCTION Technical Dept. - All rights reserved - Reproduction is prohibited Dear Customer, our products are designed and manufactured in compliance with European reference Standards for construction products (EN13240 wood-burning stoves, EN14785 pellet-burning appliances, EN13229 repla…

1, INSTALLATION GUIDE EN Instructions in English PELLET STOVE TOBA HYDRO HYDRO 22 HYDRO 22 WITH HIGH EFFICIENCY PUMP HYDRO 22 WITH EXCHANGER PART 1 - REGULATIONS AND ASSEMBLY …

30, 28 p H 6 - INSTALLATION AND ASSEMBLY ACCESS TO THE ELECTRONIC BOARD To access the electric board, remove the two screws “p” and extract door “H”. …

4, MCZ TOBA HYDRO 22 2 1 - WARNINGS AND WARRANTY CONDITIONS SAFETY PRECAUTIONS • Installation, electrical connection, function test and maintenance must only be carried out by authorised and qualied personnel. • Install the product in accordance with all local and national legislation and r…

40, 38 M D 7 - HYDRAULIC CONNECTION To ensure the valve vents, it is advisable to loosen the grey cap one turn and leave the red cap blocked (see gure). The lling pressure of the system WHEN COLD must be 1 bar. During operation, if the system pressure drops (due to evaporation o…