Mellanox Technologies MCX312B-XCCT ConnectX-3 Pro Operation & User’s Manual

47, ConnectX®-3 Pro Ethernet Dual SFP+ Port Adapter Card User Manual Rev 1.0 Mellanox Technologies 47 7.3 Board Mechanical Drawing and Dimensions Figure 9: Mechanical Drawing of the Dual-port MCX312B-XCCT All dimensions are in millimeters. All the mechanical tolerances are +/- 0.1mm. 146.7 53.59…

43, Mellanox Technologies MCX312B-XCCT ConnectX-3 Pro ConnectX®-3 Pro Ethernet Dual SFP+ Port Adapter Card User Manual Rev 1.0 Mellanox Technologies 43 6.2 Linux Environment Information cat/etc/issue uname –a cat/proc/cupinfo | grep ‘model name’ | uniq ofed_info | head -1 ifconfig –a ethtool <interface> ethtool –i <interfac…

28, Driver InstallationRev 1.0 Mellanox Technologies 28 Step 3. Select the target folder for the installation. Step 4. The firmware upgrade screen will be displayed in the following cases: • If the user has an OEM card, in this case the firmware will not be updated. • If the user has a stan…

55, ConnectX®-3 Pro Ethernet Dual SFP+ Port Adapter Card User Manual Rev 1.0 Mellanox Technologies 55 CLASS 1 LASER PRODUCT and reference to the most recent laser standards: IEC 60 825-1:1993 + A1:1997 + A2:2001 and EN 60825-1:1994+A1:1996+ A2:20. Mellanox Technologies Confidential …

11, ConnectX®-3 Pro Ethernet Dual SFP+ Port Adapter Card User Manual Rev 1.0 Mellanox Technologies 11 1.2 Features and Benefits Table 4 - Features PCI Express (PCIe) Uses PCIe Gen 3.0 (1.1 and 2.0 compatible) through an x8 edge connector up to 8GT/s 10 Gigabit Ethernet Mellanox ad…

22, Driver InstallationRev 1.0 Mellanox Technologies 22 Run the following commands to install the driver: The package consists of several source RPMs. The install script rebuilds the source RPMs and then installs the created binary RPMs. The created kernel module binaries are placed under /lib/ mod…